Cre8tek realizes universal Nilfisk fast charger

02.07.18

Cre8tek is responsible for the development and production of a new product accessory in Nilfisk's portfolio of professional cleaning equipment. It is a fast charger for batteries in cleaning machines that can be purchased from existing battery-powered cleaning machines or used as equipment and sold with new products.

Thus, a long-term cooperation between Nilfisk and Cre8tek has risen to a higher level. This is the first time Cre8tek has had full responsibility for realizing the project from idea phase to delivery.

Earlier, Cre8tek has been a consultant for mechanical design and prototype production on several of Nilfisk's products. The fast charger is the first Nilfisk project in which Cre8tek has conducted both development and production.

"At Cre8tek, we are proud that a multinational company like Nilfisk has shown us the confidence to develop and produce this new accessory. We see it as a visible proof that Cre8tek's business model uniquely combines high quality in development and production with competitive costs, "says CEO Poul Dørup Olesen, Cre8tek.

At Nilfisk they are very pleased with the collaboration with Cre8tek.

"Cre8tek has a very good understanding of quality. It's not just about getting things in a container and shipped to the customer. They deal with the problems upfront and are good at reporting. "Says senior project manager Peter Loeber, Nilfisk.

The fast charger consists of more than 150 components, and the project has taken almost two years from idea phase to finished product. The biggest challenge for Cre8teks’ engineers was to keep heat development down to a safety-acceptable level and to ensure the fast charging time required in the market by Nilfisk's users.

In addition, it has been long process to complete the necessary tests and obtain approvals at international level from the recognized Canadian test institute CSA. With international approvals, Nilfisk now has the opportunity to market their fast charger in all its markets in more than 100 countries.

The production of the fast charger takes place in Cre8tek's development and production center in Shenzhen, in the southeastern corner of China, close to Hong Kong.

Foto1 Poul Dørup Olesen CEO Cre8tek

Poul Dørup Olesen, co-owner and CEO, Cre8tek Denmark Aps

Foto2 Rune og peter med Nilfisk Hurtig Lader

Rune Lundsted Jensen (Project Manager from Cre8tek) and Peter Løber (Project Manager from Nilfisk) show Nilfisk's new fast charger.

nilfisk fastcharger

Nilfisk’s new fast charger ”Fast Charger LI 500W”

Cre8tek realizes universal Nilfisk fast charger

References

  • Ergonomic Solutions - Per Bjerring

    Ergonomic Solutions - Per Bjerring

    “Our partnership with Cre8tek in Hjørring has been excellent, both in terms of communication and the work itself, and it gives us a good inroad to the benefits that come with manufacturing in China,”

  • Peter Løber, Senior Project Manager, Nilfisk A/S

    Peter Løber, Senior Project Manager, Nilfisk A/S

    Cre8tek understands quality better than other Chinese suppliers. It's not just about getting products in a container and shipped to the customer.

  • Polaris Electronics A/S - Ib Nielsen

    Polaris Electronics A/S - Ib Nielsen

    ...From the first meeting with Cre8tek we have had a constructive dialogue from idea to production. With 3D drawings we have been able to rotate and turn the product to inspect that the mechanical parts fit with our electronics...

  • Scenar - Ulrich Burr

    Scenar - Ulrich Burr

    ”…Of course I was curious to see if the promised quality fulfilled my expectations. When the first parts arrived I was sure to have taken the right decision……Also for new projects I will choose Cre8tek…"
  • Roblon - Søren Tjønneland

    Roblon - Søren Tjønneland

    "We get prototypes delivered from Cre8tek - assembled and including electronics, mechanics and manufactured in the right materials and surfaces finish. It saves Roblon of time and resources, since the prototypes can be used directly in our acceptance tests and in our early marketing."

  • Nilfisk Advance - Palle Sørensen

    Nilfisk Advance - Palle Sørensen

    As project manager at Nilfisk Advance A/S, I use Cre8tek for the supply of mechanical prototype items.

    The prototypes from Cre8tek are manufactured by CNC machining or vacuum molding from the correct raw materials and is delivered with surface treatment according to our wishes. Before manufacturing, we always get good advices about our possibilities.
  • Nilfisk Advance - Christian Thorup Kjærgaard

    Nilfisk Advance - Christian Thorup Kjærgaard

    As a technical project manager at Nilfisk Advance, I have used Cre8tek's services in mechanical engineering, development and prototyping. An example is our VU500 project, a global multi-site project ...

  • Ergonomic Solutions - Benny Burmeister

    Ergonomic Solutions - Benny Burmeister

    We are experiencing a high degree of safety and efficiency in tooling deliveries from Cre8tek...

  • Nilfisk Advance - Henrik Thomsen

    Nilfisk Advance - Henrik Thomsen

    During the development of our VL500 product line, I had two of Cre8tek's Chinese mechanical engineers on my team. Cre8tek's work on the project was impeccable - and their engineers were part of the project team equally with our own two mechanical engineers, and they had a very good knowledge of the Western "mindset" about product development...

nyhedsbrev  Receive the latest news

nyhedsbrev


Receive the latest news


Contact