Development and manufacturing of fast charger for Nilfisk.

Development and manufacturing of fast charger for Nilfisk.

Nilfisk’s fast charger, “Fast Charger LI 500w,” has been developed and manufactured by Cre8tek as turnkey supplier from idea to manufacturing and delivery.

Development and production of marine IP67-housing

Development and production of marine IP67-housing

Cre8tek has been responsible for development and manufacturing of mechanical parts for Polaris Electronics’ first self-developed Iridium tracking transceiver.

Mechanical Design of Vacuum Cleaner Handle

Mechanical Design of Vacuum Cleaner Handle

Cre8tek has done the mechanical design of the remote controlled vacuum cleaner handle for Nilfisk Advance. A collaboration between Cre8tek, Nilfisk’s R&D department in Denmark and their manufacturing sites in Sozhou, China. The result was 3 handles to be used in different variants of the highend consumer series “Elite”.

Development and manufacturing of Medico device for Scenar

Development and manufacturing of Medico device for Scenar

For Scenar Deutchland GmbH, Cre8tek has delivered prototypes, tooling and manufacturing of mechanical components for a biofeedback handset. A dermatologic medico device for physiotherapy cosmetological treatment.

Nilfisk Advance - Development of VL500

Nilfisk Advance - Development of VL500

Cre8tek assisted Nilfisk Advance in the development of the VL500 series professionel vacuum cleaners. The Mechanical Engineering support for the project included a kick-off period with two of our engineers present locally at Nilfisk Advance in Denmark. After the kick-off period the project execution took place from our Shenzhen office where our engineers was a part of the global development team which included the Nilfisk Advance development team in Denmark as well as the Nilfisk Advance Manufacturing- and Quality team in China.

Mechanical Design - Dynamic Media Facade

Mechanical Design - Dynamic Media Facade

Being engineering consultants for Martin A/S, Cre8tek has provided the mechanical engineering for the LED facade decoration on the DI Building on the Town Hall Square in Copenhagen. A challenging project where focus has been the integration with the Architectural requirements, Design for installation and the integration with EE design.
Nilfisk Advance - Prototype VU500

Nilfisk Advance - Prototype VU500

The VU500 from Nilfisk Advance is a serie of carpet vacuum cleaners primarily for the American market. Cre8tek has delivered mechanical engineering of the brush- and intake unit of the machines. Cre8tek has also delivered fully functional prototype in production true materials and with surface treatment for the correct apperance. The prototypes were suiteable for function- and reliability testing as well as early marketing.

References

  • Ergonomic Solutions - Per Bjerring

    Ergonomic Solutions - Per Bjerring

    “Our partnership with Cre8tek in Hjørring has been excellent, both in terms of communication and the work itself, and it gives us a good inroad to the benefits that come with manufacturing in China,”

  • Peter Løber, Senior Project Manager, Nilfisk A/S

    Peter Løber, Senior Project Manager, Nilfisk A/S

    Cre8tek understands quality better than other Chinese suppliers. It's not just about getting products in a container and shipped to the customer.

  • Polaris Electronics A/S - Ib Nielsen

    Polaris Electronics A/S - Ib Nielsen

    ...From the first meeting with Cre8tek we have had a constructive dialogue from idea to production. With 3D drawings we have been able to rotate and turn the product to inspect that the mechanical parts fit with our electronics...

  • Scenar - Ulrich Burr

    Scenar - Ulrich Burr

    ”…Of course I was curious to see if the promised quality fulfilled my expectations. When the first parts arrived I was sure to have taken the right decision……Also for new projects I will choose Cre8tek…"
  • Roblon - Søren Tjønneland

    Roblon - Søren Tjønneland

    "We get prototypes delivered from Cre8tek - assembled and including electronics, mechanics and manufactured in the right materials and surfaces finish. It saves Roblon of time and resources, since the prototypes can be used directly in our acceptance tests and in our early marketing."

  • Nilfisk Advance - Palle Sørensen

    Nilfisk Advance - Palle Sørensen

    As project manager at Nilfisk Advance A/S, I use Cre8tek for the supply of mechanical prototype items.

    The prototypes from Cre8tek are manufactured by CNC machining or vacuum molding from the correct raw materials and is delivered with surface treatment according to our wishes. Before manufacturing, we always get good advices about our possibilities.
  • Nilfisk Advance - Christian Thorup Kjærgaard

    Nilfisk Advance - Christian Thorup Kjærgaard

    As a technical project manager at Nilfisk Advance, I have used Cre8tek's services in mechanical engineering, development and prototyping. An example is our VU500 project, a global multi-site project ...

  • Ergonomic Solutions - Benny Burmeister

    Ergonomic Solutions - Benny Burmeister

    We are experiencing a high degree of safety and efficiency in tooling deliveries from Cre8tek...

  • Nilfisk Advance - Henrik Thomsen

    Nilfisk Advance - Henrik Thomsen

    During the development of our VL500 product line, I had two of Cre8tek's Chinese mechanical engineers on my team. Cre8tek's work on the project was impeccable - and their engineers were part of the project team equally with our own two mechanical engineers, and they had a very good knowledge of the Western "mindset" about product development...

nyhedsbrev  Receive the latest news

nyhedsbrev


Receive the latest news


Contact